For the first try, I used the recipe from wikipedia (http://en.wikipedia.org/wiki/OpenCola_(drink))
Getting the ingredientsFirst, here's all the stuff I needed to buy:
- orange oil
- lime oil
- lemon oil
- cassia oil
- nutmeg oil
- coriander oil
- lavender oil
- neroli oil
- gum arabic
- caramel colour
- citric acid
- caffeine -- I left this out, it's optional.
For those ingredients, I paid little more than 50 euros overall, including about 15 euros of shipping costs. What I got is sufficient for between two and 40 batches of syrup (one batch of the official recipe is something like 20 liters of cola), and you'll run out of the cheap stuff (orange oil, lime oil) first.
However, it's very difficult to measure "0.25ml of neroli oil" without a suitable tool, and it's important you can do this quite reliably, as a) the stuff is expensive, and b) it's toxic if you put too much of it into the beverage. Thus, I bought a 1ml pipette (with 0.01ml marks) on ebay (all other shops would only sell 12 of them, for prices like 50 euros; on ebay, I got them for two bucks a piece, which is really nice). This turned out to be a very, very useful investment, I really recommend it.
You'll also need a balance which can at least measure 1g exactly; a good idea to test it is stacking 1-euro-coins on it (one of them weights exactly 7.5 grams).
Also have ready: 2-3 ceramic cups, 2-3 metal spoons, and a knife.
This is all the stuff you'll need:
Also, after having tried it once, I recommend putting some paper onto your table which you can dispose of later except you want your whole house to smell like cola for two weeks.
First Try: the official OpenCola recipe from WikipediaUsing the Wikipedia recipe, I did the following:
- Put 10g of gum arabic into a cup, using the balance.
- Add the oils using the pipette.
- Mix this. The first time I tried to use a blender, the second time I mixed it with a spoon, I recommend the spoon method. This step is very important; you do NOT want a liquid as a result! You want oil which has been completely absorbed by the gum arabic. If the gum arabic doesn't absorb all the oil (i.e. you still see wet spots), add more gum arabic.
- In my first try for this recipe, I added 3ml water and mixed this with my blender. It broke my blender, and produced this result (it has a consistency like if you take a rubber and cut it into small pieces, then add glue):
That's not what you want, obviously; when water is added, a viscous mass should be the result. The key to this was that 3ml water is just... not enough; using about 20ml worked really well. The best way to do this is to get another cup, add 3ml water and half a teaspoon of gum-arabic-oil-mass, and mix for two or three minutes with the teaspoon until it's a nice liquid. Then repeat until you're done.
Now, the syrup. For this first try, I made the full batch of syrup at once; as wikipedia says, this means you dissolve quite a large amount of sugar in water, then add the citric acid and the colorant (for exact amounts, see the Wikipedia page mentioned earlier).
Instead of adding 3.5 Tsp. of citric acid, if you have it in solid form, you can just add about 14g and mix well. However, I'd add more; I used 30g, that's a bit too much, maybe about 22g would be good. I'd also add more colorant than the 30ml they tell you to, otherwise the beverage just isn't black enough. I used 40ml; that's okay, but if I had had more, I'd have used 50 or even 60ml.
Then, just put your whole flavouring formula into the syrup (or, better, put some of the syrup into the flavouring formula, mix, and put it back).
The last part is easy; just mix one part of the syrup with five parts of sparkling water. Use enough syrup; if you mix it with too much water, it's going to taste very, very strange.
Now, how does it taste? Well... if you ask me, like if you mix those Haribo HappyCola sweeties with fizzy tablets. It's not especially bad, but it tastes quite artificial and agressive.
Second Try: Cube Cola
Having quite some ingredients left, I decided making another batch of cola using a different recipe: http://sparror.cubecinema.com/cube/cola/new_recipe.html.
What's different? Well, there's a shift in the oil mix; they use more orange and lime, and less cassia oil. They also have some good ideas for organizing things, making preparation much easier. I recommend you read the recipe before reading on, I'll just comment on what they do in the following text, not re-tell it.
So, let's start. First, mix the oils, the gum arabic, and the water like described above. The Cube Cola guys use a hammer drill to mix, this really isn't necessary, a spoon, a cup, and a bit of patience (20 - 30 minutes) for mixing is enough.
They then mix this flavouring formula with the citric acid and the colorant; however, I would NOT mix the colorant with this, as you can then use your pipette to easily and exactly measure the resulting concentrate (for the "small" syrup batch, just use about 6.5ml of concentrate instead of the 14ml they tell you if you leave out the colorant here).
To prepare the syrup, make the water warm a bit after adding the sugar, it'll be very, very difficult to dissolve it all otherwise. For a small batch of syrup, I used:
- 188ml tap water
- 375g sugar
- 7.5ml of colorant (I add that later, I'm out of it currently)
- 6.5ml of flavouring formula (oils+gum arabic+citric acid, *without* colorant, if you added the colorant, use 14ml of this and don't add further colorant instead)
- 1 package (8g) of vanillin sugar (I read that somewhere, I tried it and I think it's good)
Again, how does this taste? Better, definitely; and less smooth (there's less sugar in it overall). Much less artificial, much less after taste, just... better. In fact, it's quite enjoyable, and if you'd like to try this yourself, I can recommend this recipe. By mixing the citric acid with the flavouring formula early, it's also very easy to handle as you can make like 400ml of syrup easily (not 5l like for the other recipe).
If you have questions, feel free to comment or write me an email.